Home Up Customer Service Specials Order Desk Contact Us

 

Motors: Three Phase (K)                                                            Page 10 of 13 

56-Frame, 143/145T-Frame, 182T-Frame, 213/215T-404T-Frame motors are used in commercial and industrial fans, ventilation fans, blowers and other belt driven applications.  Also for conveyors, reducers and other industrial equipment requiring 208-230/460 or 575 volts.   

See below to access other pages/categories. To order, highlight desired Product #, right click to copy, then go to Order Desk and paste in appropriate field.

56C-215TC-Frame Three Phase Brake
575V (K)

Uses: Industrial and commercial applications requiring a NEMA-frame motor that provides fail-safe positive stop and hold action. Assembly line, food processing etc... 
Features: Pre-connected to motors with 145T and smaller frames. Power off manual release.  TEFC with rigid base.

HP RPM Frame Brake Rating Product#
1/3 1725 56C 3ft-lbs. 110708
1/2 1725 56C 3 110709
3/4 1725 56C 6 110710
1 1725 56C 6 110818
1.5 1725 145TC 10 121171
2 1725 145TC 10 121172
3 1725 182TC 15 161321BRK
5 1725 184TC 25 161323BRK
7.5 1725 213TC 35 160207BRK
10 1725 215TC 50 160212BRK
56C-145TC-Frame Three Phase (K) Washdown    208/230-460

Uses: Superior extended service in severe environments: food processing, areas of high humidity and chemical environments.
Features: Shaft seals, slingers and on-way stainless steel drains retard entrance of contaminants and water. Double sealed bearings. Nylon gaskets.

HP RPM Frame FLA @ 230V Product #
1/4 1725 56C 1.3 112520
1/3 1725 56C 1.3 112521
1/2 1725 56C 2.0 112483
3/4 1725 56C 2.4 112484
1 1725 56C 2.6 112522
1 1725 143TC 3.1 121073
1.5 1725 145TC 4.2 121074
2 1725 145TC 6.0 121075
3 1725 182TC 8.2 131260
5 1725 184TC 13.0 G131261

56C-145TC-Frame Explosion Proof 
575V (K)

Uses: Superior extended service in hazardous environments: food processing, areas of high humidity and chemical environments.
Features: Double shielded, pre-lubricated ball bearings. Inherent automatic overload protection. Conduit box included

HP RPM Volts Frame Product #
1/3 1725 575 56C 111214
1/2 1725 575 56C 111157
3/4 1725 575 56C 111216
1 1725 575 56C 111160
1.5 1725 575 56C 112101
3 1725 575 182TC G850632
5 1725 575 184TC G850633
7.5 1725 575 213TC G850634
10 1725 575 215TC G850635
15 1725 575 254TC G850636

To order, highlight desired Product #, right click to copy, then go to Order Desk and paste in appropriate field.

Order Desk
       Products/Categories       Page#1 of This Category

Next Page: Page #11 >> C-Face Motors With Base and Without Base

Bock Motors In Motion
Phone #416-674-2303 or #1 (213) 471-8671      Fax# 1 (866) 286-2089
Comments/Suggestions about this Web site, please e-mail sales@bockmotors.com

Copyright 2006 (Bock Motors In Motion). All rights reserved.